The Katana 3D extreme Rc Plane - Can You cope It?
The Katana 3D extreme Rc Plane - Can You cope It?
The Katana Ep extreme 3D Rc Plane with 4 -channels begs to be pushed to the limit!
This Rtf (ready to fly) comes unblemished with minimal assembly. Its construction is sturdy and lightweight. The fit and quit is some of the best I've seen!
Couple this lightweight balsa airframe with an out runner brushless motor and you've got a box that begs for the sky. This motor has the power and pull when you need it the most! An 11.1 V/1250mAh LiPo battery is included. Coupled with a 25 Amp Esc (electronic speed control) so you can use a stronger battery makes the Katana Ep a winner all the way around!
Everything is installed for your convenience. You just need to assemble the wing, prop and gear. Just two screws attach the wing in place so it can be of course removed for easy transportation. Even with my two left thumbs, I had the Katana Ep assembled and ready to go in under 12 minutes!
The 8.4 gram HiTorque servos react speedily to give you peak execution with the Katana's generous operate surfaces. Carbon fiber push rods keep down the weight while maintaining peak performance!
Features:
Model: Katana Ep R/C Airplane
*Full Function Radio Controlled
*Standard 4-Channel Radio ideas w/4 servos
*High-Quality Balsa and Plywood Construction
*Super Tough, Solid and Lightweight Airframe
*Wings: One-Piece All Wood, Dual Servos for Ailerons
*Powered by A22-15M 1090Kv Out runner Brushless Motor
*Fm 4-Channel Proportional Radio ideas w/6-Channel Receiver
*Four (4) 8.4g Hi-Torque Servos for Aileron, Rudder and Elevator Control
*Landing Gear: 0.12" (3mm) Pre-formed Aluminum w/Steel Tail Wheel Bracket
*Fabricated by strict Molds with High Fidelity of Real Airplane
*Covering: premise Applied Low-Temperature
*Electronic Speed Control: 25 Amp
*Professional Large Torsion Propeller
*Katana Ep 3D Airplane Comes 90% Pre-Assembled
*Approx. Flying Duration: 10~20 minutes
*Wing Span: 35.4" (900mm)
*Length: 35.4" (900mm)
*Wing Area: 323.5 sq in
*Flying Weight: 17oz (482g)
*Propeller Size: 10 x 4.7 (included)
*4-Channel Radio Controlled Airplane
*Battery: 11.1V 1250mAh LiPo Rechargeable Battery
*Available Color: Yellow
Included:
Katana Ep Radio Controlled Plane
*4-Channel Fm Transmitter (Requires 8 Aa Batteries)
*11.1V 1250mAh LiPo Rechargeable Battery Pack
*Wing Set, Landing Gear and Fuselage Body Set
*Home Ac Charger (110V)
*Instruction Manual
As you can see, this Rc plane packs quite a punch. I of course like this Rc airplane, and I'm sure you will too! Are you up to the 3D challenge?
0 Responses on "The Katana 3D extreme Rc Plane - Can You cope It?"
Post a Comment